• HEADSTOCK: All gears are made with chromium molydenum steel and hardened & ground to its accuracy. A forced lubrication system lubricates all running gears and bearings within the headstock.

  • GEAR BOX: Universal gear box offers a wide range of cutting capacity. All ranges can be reached by moving three levers and turning one rotary dial.

  • SPINDLE: 1-9/16" bored spindle is made from medium carbon steel and is induction hardened & ground to its final accuracy. It also has a two-point support with both bearings being taper roller.

  • APRON: Automatic feeding and threading in apron are fully interlocked to prevent simultaneous engagement of both functions.


  • TAILSTOCK: Keyed 1-1/2" diametered quill is hardened to Rockwell C 55 & ground to its inspection accuracy.

  • Oil level indicator.
  • Triangular bed web.
  • 24 volts safety control circuit.
  • Weigh in at 2,310 lbs.
  • Safety overload device.
  • Forward/stop/reverse lever.
  • Hardened & ground bed ways at Rockwell C 55.
  • Precision ground cross slideways.
  • Hand chip guard.
  • Half nut engagement handle.
  • Oil lubricated leadscrew.
  • 10" wide bed way with FC-30 casting iron.
  • Two-tone automotive paint.

[Dynamic-1440G Spec] [Dynamic Series Spec Comparison #1]
[Engine Lathe Models] [Download a Quotation]