VMC-2240XL

with ATC featuring Fanuc Control



 

Features:

  • Fanuc OiMC 3/4 Axis Control with state-of-the-art features & Programmable Spindle Speed.
  • 8.3 Color LCD Screen.
  • Gear Type ATC with proximity sensors.
  • Extra wide, two linear guide ways.
  • 24 station side mount arm type ATC.
  • Tool holder is made from nylon and fiberglass.
  • Full enclosure splash guard.
  • Tool to tool change time is at 2.1 seconds.
  • Standard transformer for machine power.
  • Side door for tool cutting view.
  • Servo motor is directly coupled through a (German made) nylon coupling to the ball screw.
  • Removable chip tank.
  • Removable coolant tank for easy cleaning.
  • C3 Ball Screws and Double-end Thrust Bearing Set (X/Y/Z).

 

  • Torque for 10 HP spindle motor continuous.
  • 15 HP 30 min peak.
  • Floating tool change device will reduce wear and pressure on the spindle.
  • Easy layout and CE standard electric cabinet.
  • Two-stage warning light.
  • 90 swivel control panel.
  • Extra wide linear guide ways.
  • Easy layout on the control panel.
  • Standard halogen light.
  • Tool clamp/unclamp button.
  • CAT/BT #40 spindle with 5 bearings for heavy cutting.
  • Laser Check & Ball Bar Calibration.
  • Coolant nozzles and air blast are standard.
  • Two axes linear guide ways by THK, NSK or equivalent.
  • The machine is weighed at 13,860 lbs.
  • Coolant level indicator.

[VMC-2240XL Spec] [Machining Center Series Spec Comparison #1]
[Machining Centers] [Download a Quotation]