1. >
  2. Products
  3. >
  4. Features

Features

  • HEADSTOCK: All gears are made with chromium molydenum steel and are hardened & ground to its accuracy. A forced lubrication system lubricates all running gears and bearing within the headstock.
  • GEAR BOX: Unique two lever universal gear box offers a wide range of cutting capacity. All ranges can be reached by moving two levers and two dials.
  • SPINDLE: 1-1/2″ bored spindle is made from medium carbon steel and is induction hardened & ground to its final accuracy. It also has a two-point support with both bearings being taper roller.
  • APRON: Automatic feeding and threading in apron are fully interlocked to prevent simultaneous engagement of both functions.
  • TAILSTOCK: Keyed 1-7/16″ diametered quill is hardened to Rockwell C 55° & ground to its inspection accuracy.
  • Nine-step speeds.
  • Oil level indicator.
  • Standard foot brake.
  • 24 volts safety control circuit.
  • Weigh in at 1,320 / 1,380 lbs.
  • Safety overload device.
  • Forward/stop/reverse lever.
  • Chip-pan (Removable type).
  • Oil level indicator.
  • Precision ground saddle ways.
  • Half nut engagement handle.
  • Hexagonal bed web.
  • Oil lubricated leadscrew.
  • 7-1/2″ wide bed way with FC-30 casting iron.
  • Two-tone automotive paint.